Washington · statute · Wash. Rev. Code ch. 19.27A · 29 active provisions
Except as provided in RCW 19.27A.020(7), the Washington state energy code for residential buildings shall be the maximum and minimum energy code for residential buildings in each city, town, and county and shall be enforced by each city, town, and county no later than July 1, 1991. The Washington state energy code for…
(1) The state building code council in the department of enterprise services shall adopt rules to be known as the Washington state energy code as part of the state building code.(2) The council shall follow the legislature's standards set forth in this section to adopt rules to be known as the Washington state energy c…
(1) The minimum state energy code for new and renovated nonresidential buildings, as specified in this chapter, shall be the Washington state energy code, 1986 edition, as amended. The state building code council may, by rule adopted pursuant to chapter 34.05 RCW, RCW 19.27.031, and RCW 19.27.032, 19.27.033, and 19.27.…
(1) The state building code council shall exempt equipment shelters of personal wireless service facilities from building envelope insulation requirements.(2) For the purposes of this section, "personal wireless service facilities" means facilities for the provision of personal wireless services.
(1) The state building code council shall maintain the state energy code for residential structures in a status which is consistent with the state's interest as set forth in section 1, chapter 2, Laws of 1990. In maintaining the Washington state energy code for residential structures, beginning in 1996 the council shal…
As used in this chapter, references to the state building code council shall be construed to include any successor agency.
(1) "Hot water heater" means the primary source of hot water for a residence.(2) The thermostat of a new water heater offered for sale or lease in this state for use in a residential unit, shall be preset by the manufacturer no higher than one hundred twenty degrees Fahrenheit (or forty-nine degrees Celsius) or the min…
It is hereby declared that modern, efficient, safety-tested portable oil-fueled heaters may be offered for sale, sold, and used in this state. However, fire hazards and other dangers to the health, safety, and welfare of the inhabitants of this state may exist absent legislation to provide reasonable assurances that po…
Unless the context clearly requires otherwise, the definitions in this section apply throughout RCW 19.27A.080 through 19.27A.120.(1) "Portable oil-fueled heater" means any nonflue-connected, self-contained, self-supporting, oil-fueled, heating appliance equipped with an integral reservoir, designed to be carried from…
Notwithstanding any other section of the state building code, chapter 19.27 RCW, or any other code adopted by reference in chapter 19.27 RCW, approved portable oil-fueled heaters may be offered for sale, sold, and used as a supplemental heat source in structures in the state. Portable oil-fueled heaters which are not a…
Approved portable oil-fueled heaters must adhere to the following requirements:(1) Labeling must be affixed to the heater to caution and inform the user concerning:(a) The necessity for an adequate source of ventilation when the heater is operating;(b) The use of suitable fuel;(c) The proper manner of refueling;(d) The…
The chief of the Washington state patrol, through the director of fire protection, is the only authority having jurisdiction over the approval of portable oil-fueled heaters. The sale and use of portable oil-fueled heaters is governed exclusively by RCW 19.27A.080 through 19.27A.120: PROVIDED, That cities and counties…
The penalty for failure to comply with RCW 19.27A.080 through 19.27A.120 is a misdemeanor.
The legislature finds that energy efficiency is the cheapest, quickest, and cleanest way to meet rising energy needs, confront climate change, and boost our economy. More than thirty percent of Washington's greenhouse gas emissions come from energy use in buildings. Making homes, businesses, and public institutions mor…
The definitions in this section apply to RCW 19.27A.130 through 19.27A.190 and 19.27A.020 unless the context clearly requires otherwise.(1) "Benchmark" means the energy used by a facility as recorded monthly for at least one year and the facility characteristics information inputs required for a portfolio manager.(2) "…
(1) To the extent that funding is appropriated specifically for the purposes of this section, the department of commerce shall develop and implement a strategic plan for enhancing energy efficiency in and reducing greenhouse gas emissions from homes, buildings, districts, and neighborhoods. The strategic plan must be u…
(1) Except as provided in subsection (2) of this section, residential and nonresidential construction permitted under the 2031 state energy code must achieve a seventy percent reduction in annual net energy consumption, using the adopted 2006 Washington state energy code as a baseline.(2) The council shall adopt state…
(1) On and after January 1, 2010, qualifying utilities shall maintain records of the energy consumption data of all nonresidential and qualifying public agency buildings to which they provide service. This data must be maintained for at least the most recent twelve months in a format compatible for uploading to the Uni…
By December 31, 2009, to the extent that funding is appropriated specifically for the purposes of this section, the department of commerce shall develop and recommend to the legislature a methodology to determine an energy performance score for residential buildings and an implementation strategy to use such informatio…
(1) The requirements of this section apply to the department of enterprise services and other qualifying state agencies only to the extent that specific appropriations are provided to those agencies referencing chapter 423, Laws of 2009 or chapter number and this section.(2) By July 1, 2010, each qualifying public agen…
The definitions in this section apply throughout RCW 19.27A.210, 19.27A.220, 19.27A.230, 19.27A.240, and 19.27A.250 unless the context clearly requires otherwise.(1) "Agricultural structure" means a structure designed and constructed to house farm implements, hay, grain, poultry, livestock, or other horticultural produ…
(1)(a) By November 1, 2020, the department must establish by rule a state energy performance standard for covered buildings.(b) In developing energy performance standards, the department shall seek to maximize reductions of greenhouse gas emissions from the building sector. The standard must include energy use intensit…
(1) The department must establish a state energy performance standard early adoption incentive program consistent with the requirements of this section. This early adoption incentive program may include incentive payments for early adoption of tier 2 covered building owner requirements as described in subsection (6) of…
(1) The department may not issue a certification for a tier 1 incentive application under RCW 19.27A.220(8)(a) if doing so is likely to result in total incentive payments under RCW 19.27A.220(8)(a) in excess of $75,000,000.(2) The department may not issue certification for a tier 2 incentive application under RCW 19.27…
(1)(a) Each qualifying utility must administer incentive payments for the state energy performance standard early adoption incentive program established in RCW 19.27A.220 on behalf of its customers who are eligible building owners of covered commercial buildings, multifamily residential buildings, or other tier 2 cover…