24 CFR 3282.601
§ 3282.601 Purpose and applicability.
United States · 24 CFR — Housing and Urban Development · Status: effective
Cite this
- Citation
- 24 CFR 3282.601, § 3282.601 Purpose and applicability, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/103141
- Permanent ID
ys:prov:103141@1- SHA-256
68a5cc18f3a0cf72719b4d2e3bd0819b03b04fab620269c1b35b5ba5e7d9a3ec
The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.
Full text
(a) Purpose of section. Under HUD oversight, this section establishes the procedure for limited on-site completion of some aspects of construction that cannot be completed at the factory.
(b) Applicability. This section may be applied when all requirements of this subpart are met. To be applicable a manufactured home must:
(1) Be substantially completed in the factory;
(2) Meet the requirements of the Construction and Safety Standards upon completion of the site work; and
(3) Be inspected by the manufacturer's IPIA as provided in this subpart, unless specifically exempted as installation under HUD's Model Installation Standards, 24 CFR part 3285. This subpart does not apply to Alternative Construction (see § 3282.14) that does not comply with the Manufactured Home Construction and Safety Standards.
(c) Exception. An add-on or attached accessory building or structure which does not affect the performance and ability of the manufactured home to comply with the standards in accordance with § 3282.8(j) is not governed by this section.
Legislative history
This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.