24 CFR 3285.405
§ 3285.405 Severe wind zones.
United States · 24 CFR — Housing and Urban Development · Status: effective
Cite this
- Citation
- 24 CFR 3285.405, § 3285.405 Severe wind zones, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/103196
- Permanent ID
ys:prov:103196@1- SHA-256
c61ca51fcad2e4e71d864282ce105e6ff4bd1172851a9383cc1a676354407d69
The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.
Full text
When any part of a home is installed within 1,500 feet of a coastline in Wind Zones II or III, the manufactured home must be designed for the increased requirements, as specified on the home's data plate (refer to § 3280.5(f) of this chapter) in accordance with acceptable engineering practice. Where site or other conditions prohibit the use of the manufacturer's instructions, a registered professional engineer or registered architect, in accordance with acceptable engineering practice, must design anchorage for the special wind conditions.
Legislative history
This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.