26 CFR 1.45Y-0
§ 1.45Y-0 Table of contents.
United States · 26 CFR — Internal Revenue · Status: effective
Cite this
- Citation
- 26 CFR 1.45Y-0, § 1.45Y-0 Table of contents, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/108798
- Permanent ID
ys:prov:108798@1- SHA-256
ab00cdaaedb504a1f43f9d0e59bafd5e3440fa42e46f350de190bf20cacde3ac
The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.
Full text
This section lists the captions contained in §§ 1.45Y-1 through 1.45Y-5.
(a) Overview.
(1) In general.
(2) CHP property.
(i) In general.
(ii) Components excluded.
(3) Code.
(4) kWh.
(5) Metering device.
(i) In general.
(ii) Standards for maintaining and operating a metering device.
(iii) Network equipment.
(iv) Examples.
(6) Qualified facility.
(7) Related person.
(i) In general.
(ii) Member of a consolidated group.
(8) Secretary.
(9) Section 45Y credit.
(10) Section 45Y regulations.
(11) Unrelated person.
(12) Waste energy recovery property (WERP).
(b) Credit amount.
(1) In general.
(2) Applicable amount.
(i) In general.
(ii) Base amount.
(iii) Alternative amount.
(3) Inflation adjustment.
(i) In general.
(ii) Annual computation.
(iii) Inflation adjustment factor.
(iv) GDP implicit price deflator.
(4) Energy communities increase in credit.
(5) Domestic content bonus credit amount.
(c) Credit phase-out.
(1) In general.
(2) Phase-out percentage.
(3) Applicable year.
(4) Phase-out data.
(5) Determination of phase-out.
(d) Requirements for CHP property.
(1) In general.
(2) Energy efficiency percentage.
(3) Special rule for calculating electricity produced by CHP property.
(i) In general.
(ii) Conversion from Btu to kWh.
(e) Applicability date.
(a) Qualified facility.
(b) Property included in qualified facility.
(1) In general.
(2) Unit of qualified facility.
(i) In general.
(ii) Functionally interdependent.
(3) Integral part.
(i) In general.
(ii) Power conditioning and transfer equipment.
(iii) Roads.
(iv) Fences.
(v) Buildings.
(vi) Shared integral property.
(vii) Examples.
(c) Coordination with other credits.
(1) In general.
(2) Allowed.
(3) Examples.
(d) Applicability date.
(a) In general.
(b) Qualified facility requirements.
(c) Nameplate capacity for purposes of the One Megawatt Exception.
(1) In general.
(2) Nameplate capacity for qualified facilities that generate in direct current for purposes of the One Megawatt Exception.
(3) Integrated operations.
(4) Related taxpayers.
(i) Definition.
(ii) Related taxpayer rule.
(d) Applicability date.
(a) Only production in the United States taken into account for purposes of section 45Y.
(b) Production attributable to the taxpayer.
(1) In general.
(2) Example of gross sales.
(3) Section 761(a) election.
(c) Expansion of facility; Incremental production (Incremental Production Rule).
(1) In general.
(2) Measurement standard.
(3) Special rule for restarted facilities.
(4) Computation of increased amount of electricity produced.
(5) Examples.
(d) Retrofit of an existing facility (80/20 Rule).
(1) In general.
(2) Cost of new components of property.
(3) Examples.
(e) Applicability date.
(a) In general.
(b) Definitions.
(1) CO2e per kWh.
(2) Combustion.
(3) Gasification.
(4) Facility that produces electricity through combustion or gasification (C&G Facility).
(5) Greenhouse gas emissions rate.
(6) Greenhouse gases emitted into the atmosphere by a facility in the production of electricity.
(7) Non-C&G Facility.
(8) Fuel.
(9) Feedstock.
(10) Market-mediated effects.
(c) Non-C&G Facilities.
(1) Determining a greenhouse gas emissions rate for Non-C&G Facilities.
(i) Excluded emissions.
(ii) Emissions assessment process.
(iii) Example of greenhouse gas emissions rate determination for a Non-C&G Facility.
(2) Non-C&G Facilities with a greenhouse gas emissions rate that is not greater than zero.
(d) C&G Facilities.
(1) Determining a greenhouse gas emissions rate for C&G Facilities.
(2) LCA requirements.
(i) Starting boundary.
(ii) Ending boundary.
(iii) Baseline.
(iv) Offsets and offsetting activities.
(v) Principles for included emissions.
(vi) Principles for excluded emissions.
(vii) Alternative fates and avoided emissions.
(viii) Temporal scales.
(ix) Spatial scales.
(x) Categorization of products.
(e) Use of methane from certain sources to produce electricity.
(1) In general.
(2) Definitions.
(i) Biogas.
(ii) Coal mine methane.
(iii) Fugitive methane.
(iv) Renewable natural gas.
(3) Considerations regarding the lifecycle greenhouse gas emissions associated with the production of electricity using methane from certain sources.
(i) In general.
(ii) Methane from landfill sources.
(iii) Methane from wastewater sources.
(iv) Coal mine methane.
(v) Methane from animal waste.
(vi) Fugitive methane other than coal mine methane.
(4) Book and claim.
(f) Carbon capture and sequestration.
(1) In general.
(2) Substantiation.
(g) Annual publication of emissions rates.
(1) In general.
(2) Publication of analysis required for changes to the Annual Table.
(h) Provisional emissions rates.
(1) In general.
(2) Rate not established.
(3) Process for filing a PER petition.
(4) PER determination.
(5) Emissions value request process.
(6) LCA model for determining an emissions value for C&G Facilities.
(7) Effect of PER.
(i) Reliance on Annual Table or Provisional Emissions Rate.
(j) Substantiation.
(1) In general.
(2) Sufficient substantiation.
(k) Applicability date.
Legislative history
This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.