26 CFR 1.167(b)-0
§ 1.167(b)-0 Methods of computing depreciation.
United States · 26 CFR — Internal Revenue · Status: effective
Cite this
- Citation
- 26 CFR 1.167(b)-0, § 1.167(b)-0 Methods of computing depreciation, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/109245
- Permanent ID
ys:prov:109245@1- SHA-256
8223dda5974713ac130a17aba6a244e5e1660f2d91d8c6b390b342c1f146c546
The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.
Full text
(a) In general. Any reasonable and consistently applied method of computing depreciation may be used or continued in use under section 167. Regardless of the method used in computing depreciation, deductions for depreciation shall not exceed such amounts as may be necessary to recover the unrecovered cost or other basis less salvage during the remaining useful life of the property. The reasonableness of any claim for depreciation shall be determined upon the basis of conditions known to exist at the end of the period for which the return is made. It is the responsibility of the taxpayer to establish the reasonableness of the deduction for depreciation claimed. Generally, depreciation deductions so claimed will be changed only where there is a clear and convincing basis for a change.
(b) Certain methods. Methods previously found adequate to produce a reasonable allowance under the Internal Revenue Code of 1939 or prior revenue laws will, if used consistently by the taxpayer, continue to be acceptable under section 167(a). Examples of such methods which continue to be acceptable are the straight line method, the declining balance method with the rate limited to 150 percent of the applicable straight line rate, and under appropriate circumstances, the unit of production method. The methods described in section 167(b) and §§ 1.167(b)-1, 1.167(b)-2, 1.167(b)-3, and 1.167(b)-4 shall be deemed to produce a reasonable allowance for depreciation except as limited under section 167(c) and § 1.167(c)-1. See also § 1.167(e)-1 for rules relating to change in method of computing depreciation.
(c) Application of methods. In the case of item accounts, any method which results in a reasonable allowance for depreciation may be selected for each item of property, but such method must thereafter be applied consistently to that particular item. In the case of group, classified, or composite accounts, any method may be selected for each account. Such method must be applied to that particular account consistently thereafter but need not necessarily be applied to acquisitions of similar property in the same or subsequent years, provided such acquisitions are set up in separate accounts. See, however, § 1.167(e)-1 and section 446 and the regulations thereunder, for rules relating to changes in the method of computing depreciation, and § 1.167(c)-1 for restriction on the use of certain methods. See also § 1.167(a)-7 for definition of account.
Legislative history
This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.