29 CFR 1926.554
§ 1926.554 Overhead hoists.
United States · 29 CFR — Labor · Status: effective
Cite this
- Citation
- 29 CFR 1926.554, § 1926.554 Overhead hoists, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/129269
- Permanent ID
ys:prov:129269@1- SHA-256
eaeb231cda3d3084b465d2cf58c212b9e34155bc334f3b6e56297d43879ba7c2
The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.
Full text
(a) General requirements.
(1) The safe working load of the overhead hoist, as determined by the manufacturer, shall be indicated on the hoist, and this safe working load shall not be exceeded.
(2) The supporting structure to which the hoist is attached shall have a safe working load equal to that of the hoist.
(3) The support shall be arranged so as to provide for free movement of the hoist and shall not restrict the hoist from lining itself up with the load.
(4) The hoist shall be installed only in locations that will permit the operator to stand clear of the load at all times.
(5) Air hoists shall be connected to an air supply of sufficient capacity and pressure to safely operate the hoist. All air hoses supplying air shall be positively connected to prevent their becoming disconnected during use.
(6) All overhead hoists in use shall meet the applicable requirements for construction, design, installation, testing, inspection, maintenance, and operation, as prescribed by the manufacturer.
(b) Specific requirements. [Reserved]
Legislative history
This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.