30 CFR 57.6406
§ 57.6406 Duration of current flow.
United States · 30 CFR — Mineral Resources · Status: effective
Cite this
- Citation
- 30 CFR 57.6406, § 57.6406 Duration of current flow, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/132808
- Permanent ID
ys:prov:132808@1- SHA-256
75cff424bc42f5d9661df7196eff66502cd87d6dec799cbc9df884350fdbdf23
The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.
Full text
If any part of a blast is connected in parallel and is to be initiated from powerlines or lighting circuits, the time of current flow shall be limited to a maximum of 25 milliseconds. This can be accomplished by incorporating an arcing control device in the blasting circuit or by interrupting the circuit with an explosive device attached to one or both lead lines and initiated by a 25-millisecond delay electric detonator.
Legislative history
This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.