30 CFR 57.19130
§ 57.19130 Conveyance shaft test.
United States · 30 CFR — Mineral Resources · Status: effective
Cite this
- Citation
- 30 CFR 57.19130, § 57.19130 Conveyance shaft test, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/133194
- Permanent ID
ys:prov:133194@1- SHA-256
f9537929889fe31ea2874ff75e08cb5dd8895658e856478ff8a79c5527d534fa
The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.
Full text
Before hoisting persons and to assure that the hoisting compartments are clear of obstructions, empty hoist conveyances shall be operated at least one round trip after—
(a) Any hoist or shaft repairs or related equipment repairs that might restrict or obstruct conveyance clearance;
(b) Any oversize or overweight material or equipment trips that might restrict or obstruct conveyance clearance;
(c) Blasting in or near the shaft that might restrict or obstruct conveyance clearance; or
(d) Remaining idle for one shift or longer.
Legislative history
This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.