30 CFR 77.310
§ 77.310 Control panels.
United States · 30 CFR — Mineral Resources · Status: effective
Cite this
- Citation
- 30 CFR 77.310, § 77.310 Control panels, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/134013
- Permanent ID
ys:prov:134013@1- SHA-256
b5eb614758b92e6c734215b0d857b702d7bfd2ec9c9dd180bca057966054faec
The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.
Full text
(a) All thermal dryer system control panels constructed after June 30, 1971 shall be located in an area which is relatively free of moisture and dust and shall be installed in such a manner as to minimize vibration.
(b) A schematic diagram containing legends which show the location of each thermocouple, pressure tap, or other control or gaging instrument in the drying system shall be posted on or near the control panel of each thermal drying system.
(c) Each instrument on the control panel shall be identified by a nameplate or equivalent marking.
(d) A plan to control the operation of each thermal dryer system shall be posted at or near the control panel showing a sequence of startup, normal shutdown, and emergency shutdown procedures.
Legislative history
This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.