Minn. Stat. § 103I.641
Bored Geothermal Heat Exchangers
Minnesota · Minnesota Statutes Chapter 103I — Wells, Borings, and Underground Uses · Status: effective
Cite this
- Citation
- Minn. Stat. § 103I.641, Bored Geothermal Heat Exchangers, Minnesota, version 1 as recorded 2026-09-28, yourstate.us, https://yourstate.us/provision/1702314
- Permanent ID
ys:prov:1702314@1- SHA-256
3e5ccff435c6f6dd7e0d31431fd42c3bf16c45bf3dd65cde0b77c371b1deac66
The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.
Full text
Subdivision 1. Requirements.
A person may not drill or construct an excavation used to install a bored geothermal heat exchanger unless the person is a limited well/boring contractor licensed for constructing, repairing, and sealing bored geothermal heat exchangers or a well contractor.
Subd. 2. Regulations for bored geothermal heat exchangers.
Bored geothermal heat exchangers must be constructed, maintained, and sealed under the provisions of this chapter.
Subd. 3. Permit required.
(a) A bored geothermal heat exchanger may not be installed without first obtaining a permit for the bored geothermal heat exchanger from the commissioner. A limited well/boring contractor licensed for constructing, repairing, and sealing bored geothermal heat exchangers or a well contractor must apply for the permit on forms provided by the commissioner and must pay the permit fee.
(b) As a condition of the permit, the owner of the property where the bored geothermal heat exchanger is to be installed must agree to allow inspection by the commissioner during regular working hours of Department of Health inspectors.