40 CFR 63.1186
§ 63.1186 How may I change the compliance levels of monitored parameters?
United States · 40 CFR — Protection of Environment · Status: effective
Cite this
- Citation
- 40 CFR 63.1186, § 63.1186 How may I change the compliance levels of monitored parameters?, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/175695
- Permanent ID
ys:prov:175695@1- SHA-256
214c428701391dabe7e44059e30985e11c180c30f870912ee975d268b326e65c
The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.
Full text
You may change control device and process operating parameter levels established during performance tests and used to monitor compliance if you do the following:
(a) You must notify the Administrator of your desire to expand the range of a control device or process operating parameter level.
(b) Upon approval from the Administrator, you must conduct additional performance tests at the proposed new control device or process operating parameter levels. Before operating at these levels, the performance test results must verify that, at the new levels, you comply with the emission limits in §§ 63.1178 and 63.1179 of this subpart.
Legislative history
This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.