40 CFR 63.7907
§ 63.7907 What are my inspection and monitoring requirements for surface impoundments?
United States · 40 CFR — Protection of Environment · Status: effective
Cite this
- Citation
- 40 CFR 63.7907, § 63.7907 What are my inspection and monitoring requirements for surface impoundments?, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/177226
- Permanent ID
ys:prov:177226@1- SHA-256
2472020e77f2c1c17e7404fd6abb4866bfecc091dfd9fd9bf70075cf0d0d460d
The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.
Full text
(a) If you use a floating membrane cover according to § 63.7905(b)(1), you must visually inspect the floating membrane cover and its closure devices at least annually according to the requirements in § 63.946(a).
(b) If you use a cover vented to a control device according to § 63.7905(b)(2), you must meet requirements in paragraphs (b)(1) and (2) of this section.
(1) You must visually inspect the cover and its closure devices for defects according to the requirements in § 63.946(b).
(2) You must monitor and inspect the closed vent system and control device according to the requirements in § 63.7927 that apply to you.
Legislative history
This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.