40 CFR 63.7908
§ 63.7908 How do I demonstrate continuous compliance with the emissions limitations and work practice standards for surface impoundments?
United States · 40 CFR — Protection of Environment · Status: effective
Cite this
- Citation
- 40 CFR 63.7908, § 63.7908 How do I demonstrate continuous compliance with the emissions limitations and work practice standards for surface impoundments?, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/177227
- Permanent ID
ys:prov:177227@1- SHA-256
ef513ab35d896cb1f093cb19d3a26289e95ec575b95ea20f611c99a447b7a12c
The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.
Full text
(a) You must demonstrate continuous compliance with the emissions limitations and work practice standards in § 63.7905 applicable to your affected surface impoundments by meeting the requirements in paragraphs (b) and (c) of this section as applicable to your surface impoundments.
(b) You must demonstrate continuous compliance for each surface impoundment using a floating membrane cover according to § 63.7905(b)(1) by meeting the requirements in paragraphs (b)(1) through (5) of this section.
(1) Operating and maintaining the floating membrane cover and closure devices according to the requirements in § 63.942(c), with the exceptions specified in § 63.7905(b)(1).
(2) Visually inspecting the floating membrane cover and closure devices for defects at least annually according to the requirements in § 63.946(a).
(3) Repairing defects according to the requirements in § 63.946(c).
(4) Recording the information specified in § 63.947(a)(2) and (a)(3).
(5) Keeping records to document compliance with the requirements according to the requirements in § 63.7952.
(c) You must demonstrate continuous compliance for each surface impoundment using a cover vented to a control device according to § 63.7905(b)(2) by meeting the requirements in paragraphs (c)(1) through (6) of this section.
(1) Operating and maintaining the floating membrane cover and closure devices according to the requirements in § 63.943(c), with the exceptions specified in § 63.7905(b)(2).
(2) Visually inspecting the cover and its closure devices for defects at least annually according to the requirements in § 63.946(b).
(3) Repairing defects according to the requirements in § 63.946(c).
(4) Recording the information specified in § 63.947(a)(2) and (a)(3).
(5) Meeting each applicable requirement for demonstrating continuous compliance with the emission limitations and work practice standards for a closed vent system and control device in § 63.7928.
(6) Keeping records to document compliance with the requirements according to the requirements in § 63.7952.
Legislative history
This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.