§ 74.16 Application requirements for combustion sources.

(a) Opt-in permit application. Each complete opt-in permit application for a combustion source shall contain the following elements in a format prescribed by the Administrator: (1) Identification of the combustion source, including company name, plant name, plant site address, mailing address, description of the combustion source, and information and diagrams on the combustion source's configuration; (2) Identification of the designated representative, including name, address, telephone number, and facsimile number; (3) The year and month the combustion source commenced operation; (4) The number of hours the combustion source operated in the six months preceding the opt-in permit application and supporting documentation; (5) The baseline or alternative baseline data under § 74.20; (6) The actual SO2 emissions rate under § 74.22; (7) The allowable 1985 SO2 emissions rate under § 74.23; (8) The current allowable SO2 emissions rate under § 74.24; (9) The current promulgated SO2 emissions rate under § 74.25; (10) If the combustion source seeks to qualify for a transfer of allowances from the replacement of thermal energy, a thermal energy plan as provided in § 74.47 for combustion sources; and (11) A statement whether the combustion source was previously an affected unit under this part; (12) A statement that the combustion source is not an affected unit under § 72.6 of this chapter and does not have an exemption under § 72.7, § 72.8, or § 72.14 of this chapter; (13) A complete compliance plan for SO2 under § 72.40 of this chapter; and (14) The following statement signed by the designated representative of the combustion source: “I certify that the data submitted under subpart C of part 74 reflects actual operations of the combustion source and has not been adjusted in any way.” (b) Accompanying documents. The designated representative of the combustion source shall submit a monitoring plan in accordance with § 74.61.