40 CFR 211.212-4
§ 211.212-4 Testing procedures.
United States · 40 CFR — Protection of Environment · Status: effective
Cite this
- Citation
- 40 CFR 211.212-4, § 211.212-4 Testing procedures, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/184696
- Permanent ID
ys:prov:184696@1- SHA-256
85bfa0373d6fa114b79da9eddd77e62237a02c58468d793c96cb6989623157b5
The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.
Full text
(a) The manufacturer must conduct one valid test according to the test procedures specified in § 211.206 for each hearing protector selected for testing under § 211.212-2.
(b) The manufacturer must not repair or adjust the test hearing protectors once compliance testing has been initiated. In the event a hearing protector is unable to complete the test, the manufacturer may replace the protector. Any replacement protector will be of the same category as the protector being replaced. It will be selected from the remaining designated test protectors and will be subject to all the provisions of these regulations. Any replacement and the reason for replacement must be reported in the compliance audit test report.
Legislative history
This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.