§ 464.12 Effluent limitations guidelines representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available.

Except as provided in 40 CFR 125.30 through 125.32, any existing point source subject to this subpart must achieve the following effluent limitations representing the degree of effluent reduction attainable by the application of the best practicable control technology currently available, except that non-continuous dischargers shall not be subject to the maximum day and maximum for monthly average mass (kg/1,000 kkg or lb/million lb of metal poured; kg/62.3 million Sm 3 or lb/billion SCF of air scrubbed) effluent limitations for copper, lead, zinc, total phenols, oil and grease, and TSS. For non-continuous dischargers, annual average mass limitations and maximum day and maximum for monthly average concentration (mg/l) limitations shall apply. Concentration limitation and annual average mass limitation shall only apply to non-continuous dischargers. (a) Casting Cleaning Operations. BPT Effluent Limitations (b) Casting Quench Operations. BPT Effluent Limitations (c) Die Casting Operations. BPT Effluent Limitations (d) Dust Collection Scrubber Operations. BPT Effluent Limitations (e) Grinding Scrubber Operations. No discharge of process wastewater pollutants to navigable waters. (f) Investment Casting. BPT Effluent Limitations (g) Melting Furnace Scrubber Operations. BPT Effluent Limitations (h) Mold Cooling Operations. BPT Effluent Limitations