yourstate.us
40 CFR 721.10927

§ 721.10927 Bimodal mixture consisting of multi-walled carbon nanotubes and other classes of carbon nanotubes (generic).

United States · 40 CFR — Protection of Environment · Status: effective

Get this as JSONEmbed this
Cite this
Citation
40 CFR 721.10927, § 721.10927 Bimodal mixture consisting of multi-walled carbon nanotubes and other classes of carbon nanotubes (generic), United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/193115
Permanent ID
ys:prov:193115@1
SHA-256
60c12c78010cb943fbca6e472232a868c6f18b1487eefe340b7c8e99db5828cd

The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.

Full text

(a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as a bimodal mixture consisting of multi-walled carbon nanotubes and other classes of carbon nanotubes (PMN P-11-482) is subject to reporting under this section for the significant new uses described in paragraph (a)(2) of this section. (2) The significant new uses are: (i) Protection in the workplace. Requirements as specified in § 721.63(a)(1), (a)(2)(i), (a)(2)(ii), (a)(3), (a)(4), (a)(6) (particulate), and (c). When determining which persons are reasonably likely to be exposed as required for § 721.63(a)(1) and (a)(4), engineering control measures (e.g., enclosure or confinement of the operation, general and local ventilation) or administrative control measures (e.g., workplace policies and procedures) shall be considered and implemented to prevent exposure, where feasible. A National Institute for Occupational Safety and Health (NIOSH)-certified air purifying, tight-fitting full-face respirator equipped with N-100, P-100, or R-100 cartridges, or power air purifying particulate respirator with an Assigned Protection Factor (APF) of at least 50 meets the requirements of § 721.63(a)(4). (ii) Industrial, commercial, and consumer activities. Requirements as specified in § 721.80(k) and (q). A significant new use is any use involving an application method that generates a vapor, mist or aerosol. (iii) Disposal. Requirements as specified in § 721.85(a)(1), (a)(2), (b)(1), (b)(2), (c)(1), and (c)(2). (iv) Release to water. Requirements as specified in § 721.90(b)(1) and (c)(1). Any predictable or purposeful release of a manufacturing stream associated with any use of the substance from any site is a significant new use other than the water releases described in the manufacturing process of PMN P-11-482. (b) Specific requirements. The provisions of subpart A of this part apply to this section except as modified by this paragraph. (1) Recordkeeping. Recordkeeping requirements as specified in § 721.125(a) through (e), (i), (j), and (k) are applicable to manufacturers and processors of this substance. (2) Limitations or revocation of certain notification requirements. The provisions of § 721.185 apply to this section. (3) Determining whether a specific use is subject to this section. The provisions of § 721.1725(b)(1) apply to paragraph (a)(2)(ii) of this section.

Legislative history

This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.