§ 1037.655 Post-useful life vehicle modifications.

(a) General. This section specifies vehicle modifications that may occur in certain circumstances after a vehicle reaches the end of its regulatory useful life. We may require a higher burden of proof with respect to modifications that occur within the useful life period, and the specific examples presented here do not necessarily apply within the useful life. This section also does not apply with respect to engine modifications or recalibrations. (b) Allowable modifications. You may modify a vehicle for the purpose of reducing emissions, provided you have a reasonable technical basis for knowing that such modification will not increase emissions of any other pollutant. “Reasonable technical basis” has the meaning given in 40 CFR 1068.30. This generally requires you to have information that would lead an engineer or other person familiar with engine and vehicle design and function to reasonably believe that the modifications will not increase emissions of any regulated pollutant. (c) Examples of allowable modifications. The following are examples of allowable modifications: (1) It is generally allowable to remove tractor roof fairings after the end of the vehicle's useful life if the vehicle will no longer be used primarily to pull box vans. (2) Other fairings may be removed after the end of the vehicle's useful life if the vehicle will no longer be used significantly on highways with a vehicle speed of 55 miles per hour or higher. (d) Examples of prohibited modifications. The following are examples of modifications that are not allowable: (1) No person may disable a vehicle speed limiter prior to its expiration point. (2) No person may remove aerodynamic fairings from tractors that are used primarily to pull box vans on highways.