40 CFR 1090.310
§ 1090.310 Diesel fuel additives standards.
United States · 40 CFR — Protection of Environment · Status: effective
Cite this
- Citation
- 40 CFR 1090.310, § 1090.310 Diesel fuel additives standards, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/196100
- Permanent ID
ys:prov:196100@1- SHA-256
80f654248337fcc8ff31dfa851f8aa31cfc54defad5e2292a5cf19b9662d24a1
The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.
Full text
(a) Except as specified in paragraph (b) and (c) of this section, diesel fuel additives blended into diesel fuel that is subject to the standards in § 1090.305 must have a sulfur concentration less than or equal to 15 ppm on a per-gallon basis.
(b) Diesel fuel additives do not have to comply with paragraph (a) of this section if all the following conditions are met:
(1) The additive is added to diesel fuel in a quantity less than 1.0 volume percent of the resultant mixture of additive and diesel fuel.
(2) The PTD for the diesel fuel additive complies with the requirements in § 1090.1120(b).
(3) The additive is not commercially available as a retail product for ultimate consumers.
(c) The provisions of this section do not apply to additives used in 500 ppm LM diesel fuel or ECA marine fuel.
Legislative history
This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.