40 CFR 1090.1555
§ 1090.1555 Requirements for gasoline dispensing nozzles used primarily with marine vessels.
United States · 40 CFR — Protection of Environment · Status: effective
Cite this
- Citation
- 40 CFR 1090.1555, § 1090.1555 Requirements for gasoline dispensing nozzles used primarily with marine vessels, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/196206
- Permanent ID
ys:prov:196206@1- SHA-256
0165d31233dfeb533c97330eb8b8c7dc4afdf62b697291ea06394eb7012f3e5d
The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.
Full text
The refueling hardware specifications of this section apply for any nozzle installation used primarily for dispensing gasoline into marine vessels. Note that nozzles meeting these specifications also meet the specifications of § 1090.1550(a).
(a) The outside diameter of the terminal end must have a diameter of 20.93 ± 00.43 mm.
(b) The spout must include an aspirator hole for automatic shutoff positioned with a center that is 17.0 ± 01.3 mm from the terminal end of the spout.
(c) The terminal end must have a straight section of at least 63.4 mm with no holes or grooves other than the aspirator hole.
(d) The retaining spring (if applicable) must terminate at least 76 mm from the terminal end.
Legislative history
This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.