46 CFR 35.25-10
§ 35.25-10 Requirements for fuel oil—T/ALL.
United States · 46 CFR — Shipping · Status: effective
Cite this
- Citation
- 46 CFR 35.25-10, § 35.25-10 Requirements for fuel oil—T/ALL, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/224455
- Permanent ID
ys:prov:224455@1- SHA-256
4a401044a0d79a006df8fa5bb4f0901793582a678d080d9a7c87fba3ad028617
The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.
Full text
(a) Oil to be used as fuel to be burned under boilers on tankships must have a flashpoint of not less than 140 °F. (Pensky-Martens Closed Cup Method, ASTM D 93) (incorporated by reference, see § 35.01-3).
(b) It is the duty of the Chief Engineer to make an entry in the log of each supply of fuel oil received on board, stating the quantity received, the name of the vendor, the name of the oil producer, and the flashpoint (Pensky-Martens Closed Cup Method, ASTM D93) (incorporated by reference, see § 35.01-3) for which it is certified by the producer.
(c) It is the further duty of the Chief Engineer to draw and seal at the time the supply is received on board, a half-pint sample of each lot of fuel oil, such sample to be preserved until that particular supply of oil is exhausted.
Legislative history
This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.