46 CFR 160.037-5
§ 160.037-5 Labeling and marking.
United States · 46 CFR — Shipping · Status: effective
Cite this
- Citation
- 46 CFR 160.037-5, § 160.037-5 Labeling and marking, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/229217
- Permanent ID
ys:prov:229217@1- SHA-256
1afa894a49a2b4302fde50db57fc85046a206bb025e0cb9aac89e15fc09e9b0f
The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.
Full text
(a) Labeling. Each hand orange smoke distress signal shall bear a label securely affixed thereto, showing in clear, indelible black lettering on an orange background, the following wording and information:
Directions: Pull tape over top of cap. Remove cap and ignite flare by rubbing scratch surface on top of cap sharply across igniter button on head of signal.
Caution: Stand with back to wind and point away from body when igniting or signal is burning.
Service Life Expiration Date (Month and year to be inserted by manufacturer) (Month and year manufactured) (Lot No. ____). Manufactured by (Name and address of manufacturer). U.S. Coast Guard Approval No. ____.
(b) Marking of expiration date. The expiration date must not be more than 42 months from the date of manufacture.
(c) Other marking.
(1) There shall be die-stamped, in the side of the wooden handle in figures not less than 3 mm ( 1/8 in.) high, numbers indicating the month and year of manufacture, thus: “6-54” indicating June, 1954.
(2) In addition to any other marking place on the smallest packing carton or box containing hand orange smoke distress signals such cartons or boxes shall be plainly and permanently marked to show the service life expiration date, date of manufacture, and lot number.
(3) The largest carton or box in which the manufacturer ships signals must be marked with the following or equivalent words: “Keep under cover in a dry place.”
Compliance with the labeling requirements of this section does not relieve the manufacturer of the responsibility of complying with the label requirements of 15 U.S.C. 1263, the Federal Hazardous Substances Act.
Legislative history
This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.