46 CFR 160.132-23
§ 160.132-23 Procedure for approval of design or material change.
United States · 46 CFR — Shipping · Status: effective
Cite this
- Citation
- 46 CFR 160.132-23, § 160.132-23 Procedure for approval of design or material change, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/229444
- Permanent ID
ys:prov:229444@1- SHA-256
c11cf13ec6c103929a51a00b8007ebdb42ee12b9c0f4e1d194fc523055ac0930
The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.
Full text
(a) Each change in design, material, or construction from the plans approved under 46 CFR 159.005-13 and § 160.132-13(h) of this subpart must be approved by the Commandant before being used in any production davit. The manufacturer must submit any such change following the procedures in § 160.132-9 of this subpart, but documentation on items that are unchanged from the plans approved under 46 CFR 159.005-13 and § 160.115-13(h) of this subpart need not be resubmitted.
(b) Unless determined by the Commandant to be unnecessary, a prototype davit with each change described in paragraph (a) of this section must be made and tested according to the procedures for new approvals in §§ 160.132-9 through 160.132-13 of this subpart.
(c) Determinations of equivalence of design, construction, and materials will be made by the Commandant only.
Legislative history
This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.