yourstate.us
46 CFR 160.176-23

§ 160.176-23 Marking.

United States · 46 CFR — Shipping · Status: effective

Get this as JSONEmbed this
Cite this
Citation
46 CFR 160.176-23, § 160.176-23 Marking, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/229568
Permanent ID
ys:prov:229568@1
SHA-256
69cee58149a82a2db93dfe2c1dc328955103b05bfe0b495a556915c80cad5df1

The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.

Full text

(a) General. Each inflatable lifejacket must be marked with the information required by this section. Each marking must be waterproof, clear, and permanent. Except as provided elsewhere in this subpart, each marking must be readable from a distance of three feet. (b) Prominence. Each marking required in paragraph (d) of this section, except vital care and use instructions, if any, must be less prominent and in smaller print than markings required in paragraph (c) of this section. Each optional marking must be significantly less prominent and smaller than required markings. The marking “ADULT” must be in at least 18 mm ( 3/4 inch) high bold capital lettering. If a lifejacket is stored in a package, the package must also have the marking “ADULT” or this marking must be easily visible through the package. (c) Text. Each inflatable lifejacket must be marked with the following text in the exact order shown: ADULT—For a person weighing more than 90 pounds. Approved for use on (See paragraph (e) of this section for exact text to be used here). This lifejacket must be serviced, stowed, and used in accordance with (insert description of service manual and user's manual). When fully inflated this lifejacket provides a minimum buoyant force of (insert the design buoyancy in lb.). (d) Other Information. Each lifejacket must also be marked with the following information below the text required by paragraph (c) of this section: (1) U.S. Coast Guard Approval No. (insert assigned approval number). (2) Manufacturer's or private labeler's name and address. (3) Lot Number. (4) Date, or year and calendar quarter, of manufacture. (5) Necessary vital care or use instructions, if any, such as the following: (i) Warning against dry cleaning. (ii) Size and type of inflation medium cartridges required. (iii) Specific donning instructions. (e) Approved applications. The text to be inserted in paragraph (c) of this section as the approved use will be one or more of the following as identified by the Commandant on the approval certificate issued according to § 159.005-13(a)(2) of this chapter: (1) The name of the vessel. (2) The type of vessel. (3) Specific purpose or limitation approved by the Coast Guard.

Legislative history

This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.