46 CFR 161.012-13
§ 161.012-13 Production tests and inspections.
United States · 46 CFR — Shipping · Status: effective
Cite this
- Citation
- 46 CFR 161.012-13, § 161.012-13 Production tests and inspections, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/229651
- Permanent ID
ys:prov:229651@1- SHA-256
1c2a717183d7a80df0050d11a41d0acff200f8120baf745f65c275759277a313
The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.
Full text
(a) The manufacturer of approved lights must randomly select a sample of ten lights from each lot of lights produced. Each lot must not exceed 1,000 lights. At least nine of the ten lights, when tested in accordance with the test described in § 161.012-11(c), must meet the test criteria prescribed by that section. If less than nine lights meet the test criteria, another random sample of ten lights must be taken and tested. If less than nine of these lights meet the test criteria, none of the lights in the lot may be sold as Coast Guard approved equipment.
(b) The Coast Guard does not inspect lights approved under this subpart on a regular schedule. However, the Commandant may select samples and conduct tests and examinations whenever necessary to determine whether the lights are being manufactured in compliance with the requirements in this subpart.
Legislative history
This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.