46 CFR 164.012-10
§ 164.012-10 Requirements.
United States · 46 CFR — Shipping · Status: effective
Cite this
- Citation
- 46 CFR 164.012-10, § 164.012-10 Requirements, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/229827
- Permanent ID
ys:prov:229827@1- SHA-256
70ea47116c3f1e9436814a18e9c58ecc1dba56729c8d3978e0db7afc05080496
The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.
Full text
(a) For an “Interior Finish” to qualify under this specification it shall not be more than 0.075 inch thick (including adhesive and any underlayment) and shall be subjected to the test described in either standard listed in § 164.012-1(a) (1) or (2). The “Interior Finish” shall be applied to a 1/4-inch asbestos cement board, “Bulkhead Panel” or “Incombustible Material” approved under subparts 164.008 and 164.009, in the same manner as will be employed for the shipboard installation. The classification ratings determined by this test shall not exceed the following values:
(b) [Reserved]
Legislative history
This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.