Utah Code § 73-18-8.1
Capacity and certification label
Utah · Utah Code Title 73 — Water and Irrigation · Status: effective
Cite this
- Citation
- Utah Code § 73-18-8.1, Capacity and certification label, Utah, version 1 as recorded 2026-10-03, yourstate.us, https://yourstate.us/provision/2351645
- Permanent ID
ys:prov:2351645@1- SHA-256
8ff9266fc4f47e23d30b1d88094f850e399cb8d1cccc749315ed64f0dbdc3909
The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.
Full text
(1) Each vessel manufactured after November 1, 1972, which is less than 20 feet in length, except a sailboat, canoe, kayak, inflatable vessel, or homemade motor boat must have a United States Coast Guard capacity and certification label permanently affixed to the vessel and clearly visible to the operator when boarding or operating the vessel. The capacity and certification information may be combined together and displayed on one label.
(2) No person shall operate, or give permission for the operation of, any vessel on the waters of this state if it is loaded or powered in excess of the maximum capacity information on the United States Coast Guard capacity label.
(3) No person shall alter, deface, or remove any United States Coast Guard capacity or certification information label affixed to a vessel.
(4) No person shall operate, or give permission for the operation of, a vessel on the waters of this state if the required United States Coast Guard capacity or certification information label has been altered, defaced, or removed.
(5) A violation of this section is an infraction.