47 CFR 80.98
§ 80.98 Radiotelegraph testing procedures.
United States · 47 CFR — Telecommunication · Status: effective
Cite this
- Citation
- 47 CFR 80.98, § 80.98 Radiotelegraph testing procedures, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/237384
- Permanent ID
ys:prov:237384@1- SHA-256
217034e3af703128f48b32faef8d3d5d0b3003ccb0a47e27fda72565616299bd
The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.
Full text
Stations authorized to use telegraphy may conduct tests on any assigned frequency. Emissions must not cause harmful interference. When radiation is necessary the radiotelegraph testing procedure described in this paragraph must be followed:
(a) The operator must not interfere with transmissions in progress.
(b) The operator must transmit “IE” (two dots, space, one dot) on the test frequency as a warning that test emissions are about to be made.
(c) If any station transmits “AS” (wait), testing must be suspended. When transmission of “IE” is resumed and no response is heard, the test may proceed.
(d) Test signals composed of a series of “VVV” having a duration of not more than ten seconds, followed by the call sign of the testing station will be transmitted. The call sign must be sent clearly at a speed of approximately 10 words per minute. This test transmission must not be repeated until a period of at least one minute has elapsed.
Legislative history
This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.