47 CFR 95.2163

§ 95.2163 LPRS channels.

United States · 47 CFR — Telecommunication · Status: effective

Cite this

Citation: 47 CFR 95.2163, § 95.2163 LPRS channels, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/238358
Permanent ID: ys:prov:238358@1
SHA-256: a68f6ca6dbc8b35d5150210199d88c9aa3c8b878974b22dd5170c7f88e8bce8a

The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.

Full text

LPRS transmitters may operate on any channel listed in paragraphs (a), (b), and (c) of this section. Channels 19, 20, 50, and 151-160 are available exclusively for law enforcement tracking purposes. AMTS transmissions are limited to the 216.750-217.000 MHz frequency band for low power point-to-point network control communications by AMTS coast stations. Other AMTS transmissions in the 216-217 MHz frequency band are prohibited. (a) Standard band channels. The following table lists the standard band channel numbers and corresponding center frequencies in Megahertz. (b) Extra band channels. The following table lists the extra band channel numbers and corresponding center frequencies in Megahertz. (c) Narrowband channels. The following table lists the narrowband channel numbers and corresponding center frequencies in Megahertz. (d) AMTS network control communications. LPRS stations operating as part of an AMTS may use the 216.750-217.000 MHz frequency range as a single 250 kHz bandwidth channel.

Legislative history

This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.