47 CFR 95.2165

§ 95.2165 LPRS frequency accuracy.

United States · 47 CFR — Telecommunication · Status: effective

Cite this

Citation: 47 CFR 95.2165, § 95.2165 LPRS frequency accuracy, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/238359
Permanent ID: ys:prov:238359@1
SHA-256: 64b8331d16d11595da5d1ba58899f29a478ffbd2b579162256c6278c65dcde50

The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.

Full text

Each LPRS transmitter type must be designed to satisfy the frequency accuracy requirements in this section. (a) LPRS transmitters operating on standard band (25 kHz) or extra band (50 kHz) channels must be designed such that the carrier frequencies remain within ±50 ppm of the channel center frequencies specified in § 95.2163(a) and (b), respectively, during normal operating conditions. (b) LPRS transmitters operating on narrowband (5 kHz) channels must be designed such that the carrier frequencies remain within ±1.5 ppm of the channel center frequencies specified in § 95.2163(c) during normal operating conditions.

Legislative history

This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.