49 CFR 174.112
§ 174.112 Loading Division 1.3 materials and Division 1.2 (explosive) materials (Also see § 174.101).
United States · 49 CFR — Transportation · Status: effective
Cite this
- Citation
- 49 CFR 174.112, § 174.112 Loading Division 1.3 materials and Division 1.2 (explosive) materials (Also see § 174.101), United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/256186
- Permanent ID
ys:prov:256186@1- SHA-256
8c6ea59112234fdf4d46bba7f182c426a0d260a0d41fbcff94647d71589e2859
The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.
Full text
(a) Division 1.3 materials and Division 1.2 (explosive) materials may not be loaded, transported or stored in a rail car equipped with any type of lighted heater or open-flame device, or in a rail car equipped with any apparatus or mechanism utilizing an internal combustion engine in its operation.
(b) Except as provided in § 174.101(b), (n), or (o), Division 1.3 materials and Division 1.2 (explosive) materials must be transported in a closed car or container car which is in good condition, and into which sparks cannot enter. The car does not require the car certificates prescribed in § 174.104(c) through (f). If the doors are not tight, they must be stripped to prevent the entrance of sparks. Wood floored cars must be equipped with spark shields (see § 174.104). Packages of Division 1.3 materials and Division 1.2 (explosive) materials must be blocked and braced to prevent their shifting and possible damage due to shifting of other freight during transportation. For recommended methods of blocking and bracing see the Intermodal Loading Guide for Products in Closed Trailers and Containers (see Table 1 to § 171.7 of this subchapter).
(c) Division 1.3 materials and Division 1.2 (explosive) materials may not be transported in a truck body, trailer, or container on a flatcar unless:
(1) The truck body, trailer, or container is closed and tight;
(2) All automatic heating or refrigerating machinery with which the truck body, trailer, or container is equipped is inoperative; and
(3) Packages of Division 1.2 materials and Division 1.3 (explosive) materials are blocked and braced within the truck body, trailer, or container to prevent their shifting and possible damage due to shifting of other freight during transportation (ends, sidewalls, or doors of the truck body, trailer, or container may not be relied on to prevent the shifting of heavy loads). For recommended methods of blocking and bracing see the Intermodal Loading Guide for Products in Closed Trailers and Containers (IBR, see § 171.7 of this subchapter).
Legislative history
This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.