10 CFR 429.31
§ 429.31 Urinals.
United States · 10 CFR — Energy · Status: effective
Cite this
- Citation
- 10 CFR 429.31, § 429.31 Urinals, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/39268
- Permanent ID
ys:prov:39268@1- SHA-256
2232b02da8cc13c533303aada40f673d743b73a9534a13405c6e61f784d9d34f
The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.
Full text
(a) Sampling plan for selection of units for testing.
(1) The requirements of § 429.11 are applicable to urinals; and
(2) For each basic model of urinal, a sample of sufficient size shall be randomly selected and tested to ensure that any represented value of water consumption of a basic model for which consumers favor lower values shall be greater than or equal to the higher of:
(i) The mean of the sample, where:
Or,
(ii) The upper 90 percent confidence limit (UCL) of the true mean divided by 1.1, where:
(b) Certification reports.
(1) The requirements of § 429.12 are applicable to urinals; and
(2) Pursuant to § 429.12(b)(13), a certification report shall include the following public product-specific information: The maximum water use in gallons per flush (gpf), rounded to the nearest 0.01 gallon, and for trough-type urinals, the maximum flow rate in gallons per minute (gpm), rounded to the nearest 0.01 gallon, and the length of the trough in inches (in).
Legislative history
This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.