10 CFR 431.110
§ 431.110 Energy conservation standards and their effective dates.
United States · 10 CFR — Energy · Status: effective
Cite this
- Citation
- 10 CFR 431.110, § 431.110 Energy conservation standards and their effective dates, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/39503
- Permanent ID
ys:prov:39503@1- SHA-256
e192416382d32367b86a5ce6b97776f7d54cd4aa79cbc077b5dda42390e2be16
The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.
Full text
(a) Each commercial storage water heater, instantaneous water heater, and hot water supply boiler (excluding residential-duty commercial water heaters) must meet the applicable energy conservation standard level(s) as specified in the table to this paragraph. Any packaged boiler that provides service water that meets the definition of “commercial packaged boiler” in subpart E of this part, but does not meet the definition of “hot water supply boiler” in subpart G of this part, must meet the requirements that apply to it under subpart E of this part.
Table 1 to § 431.110(a)—Commercial Water Heater Energy Conservation Standards
(b) Each unfired hot water storage tank manufactured on and after October 29, 2003, must have a minimum thermal insulation of R-12.5.
(c) Each residential-duty commercial water heater must meet the applicable energy conservation standard level(s) as follows:
Table 2 to § 431.110(c)—Residential-Duty Commercial Water Heater Energy Conservation Standards
Legislative history
This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.