10 CFR 1002.21
§ 1002.21 Description of distinguishing flag.
United States · 10 CFR — Energy · Status: effective
Cite this
- Citation
- 10 CFR 1002.21, § 1002.21 Description of distinguishing flag, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/41262
- Permanent ID
ys:prov:41262@1- SHA-256
766cfd6f092e0cf70696bd6c950fe2b0254fffe94e0b2415f2b47f3b05b0554d
The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.
Full text
(a) The base or field of the flag shall be white, and a replica of the official seal shall appear on both sides thereof.
(b)(1) The indoor flag shall be of rayon banner, measure 4′4″ on hoist by 5′6″ on the fly, exclusive of heading and hems, and be fringed on three edges with yellow rayon fringe, 2 1/2″ wide.
(2) The outdoor flag shall be of heavy weight nylon, and measure either 3′ on the hoist by 5′ on the fly or 5′ on the hoist by 8′ on the fly, exclusive of heading and hems.
(c) Each flag shall be manufactured in accordance with U.S. Department of Defense Military Specification Mil-F-2692. The official seal shall be screen printed on both sides, and on each side, the lettering shall read from left to right. Headings shall be Type II in accordance with the Institute of Heraldry Drawing No. 5-1-45E.
Legislative history
This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.