14 CFR 21.310
§ 21.310 Inspections and tests.
United States · 14 CFR — Aeronautics and Space · Status: effective
Cite this
- Citation
- 14 CFR 21.310, § 21.310 Inspections and tests, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/53843
- Permanent ID
ys:prov:53843@1- SHA-256
29adf95e3e2a0924d9a87630e6d63e56b914cb8dbc0401a60b412fed2ae92423
The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.
Full text
(a) Each applicant for or holder of a PMA must allow the FAA to inspect its quality system, facilities, technical data, and any manufactured articles and witness any tests, including any inspections or tests at a supplier facility, necessary to determine compliance with this subchapter.
(b) Unless otherwise authorized by the FAA, the applicant or holder—
(1) May not present any article to the FAA for an inspection or test unless compliance with § 21.303(b)(2) through (4) has been shown for that article; and
(2) May not make any change to an article between the time that compliance with § 21.303(b)(2) through (4) is shown for that article and the time that the article is presented to the FAA for the inspection or test.
Legislative history
This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.