14 CFR 25.1015
§ 25.1015 Oil tank tests.
United States · 14 CFR — Aeronautics and Space · Status: effective
Cite this
- Citation
- 14 CFR 25.1015, § 25.1015 Oil tank tests, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/54208
- Permanent ID
ys:prov:54208@1- SHA-256
67b7eff4d7bb79d58edf894222b226c1fcedff46797b942ff42fc1102f7f6d64
The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.
Full text
Each oil tank must be designed and installed so that—
(a) It can withstand, without failure, each vibration, inertia, and fluid load that it may be subjected to in operation; and
(b) It meets the provisions of § 25.965, except—
(1) The test pressure—
(i) For pressurized tanks used with a turbine engine, may not be less than 5 p.s.i. plus the maximum operating pressure of the tank instead of the pressure specified in § 25.965(a); and
(ii) For all other tanks may not be less than 5 p.s.i. instead of the pressure specified in § 25.965(a); and
(2) The test fluid must be oil at 250 °F. instead of the fluid specified in § 25.965(c).
Legislative history
This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.