yourstate.us
14 CFR 25.1701

§ 25.1701 Definition.

United States · 14 CFR — Aeronautics and Space · Status: effective

Get this as JSONEmbed this
Cite this
Citation
14 CFR 25.1701, § 25.1701 Definition, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/54356
Permanent ID
ys:prov:54356@1
SHA-256
5e57187e5b9865845d6cbbe6b18f3d5da59ca13662aa6173359a88a56d1f4124

The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.

Full text

(a) As used in this chapter, electrical wiring interconnection system (EWIS) means any wire, wiring device, or combination of these, including termination devices, installed in any area of the airplane for the purpose of transmitting electrical energy, including data and signals, between two or more intended termination points. This includes: (1) Wires and cables. (2) Bus bars. (3) The termination point on electrical devices, including those on relays, interrupters, switches, contactors, terminal blocks and circuit breakers, and other circuit protection devices. (4) Connectors, including feed-through connectors. (5) Connector accessories. (6) Electrical grounding and bonding devices and their associated connections. (7) Electrical splices. (8) Materials used to provide additional protection for wires, including wire insulation, wire sleeving, and conduits that have electrical termination for the purpose of bonding. (9) Shields or braids. (10) Clamps and other devices used to route and support the wire bundle. (11) Cable tie devices. (12) Labels or other means of identification. (13) Pressure seals. (14) EWIS components inside shelves, panels, racks, junction boxes, distribution panels, and back-planes of equipment racks, including, but not limited to, circuit board back-planes, wire integration units, and external wiring of equipment. (b) Except for the equipment indicated in paragraph (a)(14) of this section, EWIS components inside the following equipment, and the external connectors that are part of that equipment, are excluded from the definition in paragraph (a) of this section: (1) Electrical equipment or avionics that are qualified to environmental conditions and testing procedures when those conditions and procedures are— (i) Appropriate for the intended function and operating environment, and (ii) Acceptable to the FAA. (2) Portable electrical devices that are not part of the type design of the airplane. This includes personal entertainment devices and laptop computers. (3) Fiber optics.

Legislative history

This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.