14 CFR 27.493

§ 27.493 Braked roll conditions.

United States · 14 CFR — Aeronautics and Space · Status: effective

Cite this

Citation: 14 CFR 27.493, § 27.493 Braked roll conditions, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/54469
Permanent ID: ys:prov:54469@1
SHA-256: 1c8f917a61ade2667ac3cddc8a148658e2037c1cf0e959bdf6e5cb74a149415f

The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.

Full text

Under braked roll conditions with the shock absorbers in their static positions— (a) The limit vertical load must be based on a load factor of at least— (1) 1.33, for the attitude specified in § 27.479(a)(1); and (2) 1.0 for the attitude specified in § 27.479(a)(2); and (b) The structure must be designed to withstand at the ground contact point of each wheel with brakes, a drag load at least the lesser of— (1) The vertical load multiplied by a coefficient of friction of 0.8; and (2) The maximum value based on limiting brake torque.

Legislative history

This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.