14 CFR 29.62

§ 29.62 Rejected takeoff: Category A.

United States · 14 CFR — Aeronautics and Space · Status: effective

Cite this

Citation: 14 CFR 29.62, § 29.62 Rejected takeoff: Category A, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/54694
Permanent ID: ys:prov:54694@1
SHA-256: 2e111faf34bef660a03e6b08d238e7f3f2c6afa9f169ed881cca027899037e82

The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.

Full text

The rejected takeoff distance and procedures for each condition where takeoff is approved will be established with— (a) The takeoff path requirements of §§ 29.59 and 29.60 being used up to the TDP where the critical engine failure is recognized and the rotorcraft is landed and brought to a complete stop on the takeoff surface; (b) The remaining engines operating within approved limits; (c) The landing gear remaining extended throughout the entire rejected takeoff; and (d) The use of only the primary controls until the rotorcraft is on the ground. Secondary controls located on the primary control may not be used until the rotorcraft is on the ground. Means other than wheel brakes may be used to stop the rotorcraft if the means are safe and reliable and consistent results can be expected under normal operating conditions.

Legislative history

This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.