14 CFR 29.675
§ 29.675 Stops.
United States · 14 CFR — Aeronautics and Space · Status: effective
Cite this
- Citation
- 14 CFR 29.675, § 29.675 Stops, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/54786
- Permanent ID
ys:prov:54786@1- SHA-256
e61a053fa6cc89ce16283463a364f79e2f7944254dff2d5b64a6e8bbc9c979ef
The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.
Full text
(a) Each control system must have stops that positively limit the range of motionof the pilot's controls.
(b) Each stop must be located in the system so that the range of travel of its control is not appreciably affected by—
(1) Wear;
(2) Slackness; or
(3) Takeup adjustments.
(c) Each stop must be able to withstand the loads corresponding to the design conditions for the system.
(d) For each main rotor blade—
(1) Stops that are appropriate to the blade design must be provided to limit travel of the blade about its hinge points; and
(2) There must be means to keep the blade from hitting the droop stops during any operation other than starting and stopping the rotor.
Legislative history
This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.