14 CFR 29.1363
§ 29.1363 Electrical system tests.
United States · 14 CFR — Aeronautics and Space · Status: effective
Cite this
- Citation
- 14 CFR 29.1363, § 29.1363 Electrical system tests, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/54938
- Permanent ID
ys:prov:54938@1- SHA-256
dfe0e98b9506950a60a62dc023c473dad1b6b45a02778a80ed823a5bed13da33
The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.
Full text
(a) When laboratory tests of the electrical system are conducted—
(1) The tests must be performed on a mock-up using the same generating equipment used in the rotorcraft;
(2) The equipment must simulate the electrical characteristics of the distribution wiring and connected loads to the extent necessary for valid test results; and
(3) Laboratory generator drives must simulate the prime movers on the rotorcraft with respect to their reaction to generator loading, including loading due to faults.
(b) For each flight condition that cannot be simulated adequately in the laboratory or by ground tests on the rotorcraft, flight tests must be made.
Legislative history
This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.