yourstate.us
14 CFR — Aeronautics and Space

Appendix B to Part 43—Recording of Major Repairs and Major Alterations

United States · 14 CFR — Aeronautics and Space · Status: effective

Get this as JSONEmbed this
Cite this
Citation
14 CFR — Aeronautics and Space, Appendix B to Part 43—Recording of Major Repairs and Major Alterations, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/55278
Permanent ID
ys:prov:55278@1
SHA-256
005e3cc60549fa995bb9bed0a102285824e225846c53f0b89988d93d830b421f

The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.

Full text

(a) Except as provided in paragraphs (b), (c), and (d) of this appendix, each person performing a major repair or major alteration shall— (1) Execute FAA Form 337 at least in duplicate; (2) Give a signed copy of that form to the aircraft owner; and (3) Forward a copy of that form to the FAA Aircraft Registration Branch in Oklahoma City, Oklahoma, within 48 hours after the aircraft, airframe, aircraft engine, propeller, or appliance is approved for return to service. (b) For major repairs made in accordance with a manual or specifications acceptable to the Administrator, a certificated repair station may, in place of the requirements of paragraph (a)— (1) Use the customer's work order upon which the repair is recorded; (2) Give the aircraft owner a signed copy of the work order and retain a duplicate copy for at least two years from the date of approval for return to service of the aircraft, airframe, aircraft engine, propeller, or appliance; (3) Give the aircraft owner a maintenance release signed by an authorized representative of the repair station and incorporating the following information: (i) Identity of the aircraft, airframe, aircraft engine, propeller or appliance. (ii) If an aircraft, the make, model, serial number, nationality and registration marks, and location of the repaired area. (iii) If an airframe, aircraft engine, propeller, or appliance, give the manufacturer's name, name of the part, model, and serial numbers (if any); and (4) Include the following or a similarly worded statement— “The aircraft, airframe, aircraft engine, propeller, or appliance identified above was repaired and inspected in accordance with current Regulations of the Federal Aviation Agency and is approved for return to service. Pertinent details of the repair are on file at this repair station under Order No. ___, For signature of authorized representative) Repair station name) (Certificate No.) ____________.” (c) Except as provided in paragraph (d) of this appendix, for a major repair or major alteration made by a person authorized in § 43.17, the person who performs the major repair or major alteration and the person authorized by § 43.17 to approve that work shall execute an FAA Form 337 at least in duplicate. A completed copy of that form shall be— (1) Given to the aircraft owner; and (2) Forwarded to the Federal Aviation Administration, Aircraft Registration Branch, Post Office Box 25504, Oklahoma City, OK 73125, within 48 hours after the work is inspected. (d) For extended-range fuel tanks installed within the passenger compartment or a baggage compartment, the person who performs the work and the person authorized to approve the work by § 43.7 shall execute an FAA Form 337 in at least triplicate. A completed copy of that form shall be— (1) Placed on board the aircraft as specified in § 91.417 of this chapter; (2) Given to the aircraft owner; and (3) Forwarded to the Federal Aviation Administration, Aircraft Registration Branch, , Post Office Box 25724, Oklahoma City, OK 73125, within 48 hours after the work is inspected.

Legislative history

This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.