14 CFR 91.191
§ 91.191 Category II and Category III manual.
United States · 14 CFR — Aeronautics and Space · Status: effective
Cite this
- Citation
- 14 CFR 91.191, § 91.191 Category II and Category III manual, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/55929
- Permanent ID
ys:prov:55929@1- SHA-256
9c4f4bfc550934ccd91e15ee1716523d95ae12d2e7633d38ded99495fe152e96
The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.
Full text
(a) Except as provided in paragraph (c) of this section, after August 4, 1997, no person may operate a U.S.-registered civil aircraft in a Category II or a Category III operation unless—
(1) There is available in the aircraft a current and approved Category II or Category III manual, as appropriate, for that aircraft;
(2) The operation is conducted in accordance with the procedures, instructions, and limitations in the appropriate manual; and
(3) The instruments and equipment listed in the manual that are required for a particular Category II or Category III operation have been inspected and maintained in accordance with the maintenance program contained in the manual.
(b) Each operator must keep a current copy of each approved manual at its principal base of operations and must make each manual available for inspection upon request by the Administrator.
(c) This section does not apply to operations conducted by a certificate holder operating under part 121 or part 135 of this chapter or a holder of management specifications issued in accordance with subpart K of this part.
Legislative history
This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.