14 CFR 125.129
§ 125.129 Fuel system lines and fittings.
United States · 14 CFR — Aeronautics and Space · Status: effective
Cite this
- Citation
- 14 CFR 125.129, § 125.129 Fuel system lines and fittings, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/57083
- Permanent ID
ys:prov:57083@1- SHA-256
3ac02fc6060b8b1784779189ef181d7fcd22cacc7ee28ed2826a4aa7127e3010
The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.
Full text
(a) Fuel lines must be installed and supported so as to prevent excessive vibration and so as to be adequate to withstand loads due to fuel pressure and accelerated flight conditions.
(b) Lines connected to components of the airplane between which there may be relative motion must incorporate provisions for flexibility.
(c) Flexible connections in lines that may be under pressure and subject to axial loading must use flexible hose assemblies rather than hose clamp connections.
(d) Flexible hoses must be of an acceptable type or proven suitable for the particular application.
Legislative history
This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.