yourstate.us
Tex. Water Code § 28.001

DEFINITIONS

Texas · Texas Water Code · Status: effective

Get this as JSONEmbed this
Cite this
Citation
Tex. Water Code § 28.001, DEFINITIONS, Texas, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/580132
Permanent ID
ys:prov:580132@1
SHA-256
79d4e9fae6ffaeb5cc2c92ce6771ecf297322c0587326659b46d0d23f174706a

The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.

Full text

In this chapter: (1) "Commission" means the Texas Commission on Environmental Quality. (2) "Executive Director" means the executive director of the Texas Commission on Environmental Quality. (3) "Shaft" means any vertically oriented excavation, whether constructed by drilling or mining techniques, where the depth of the excavation is greater than its diameter, the excavation penetrates into or through the base of the uppermost water-bearing strata, and the primary purpose of the excavation is the transport of workers and materials to and from a destination, at depth, for purposes of geological studies, access to existing and planned subsurface mine workings, or for ventilation of those workings. (4) "Water" or "water in the state" means groundwater, percolating or otherwise, lakes, bays, ponds, impounding reservoirs, springs, rivers, streams, creeks, estuaries, marshes, inlets, canals, the Gulf of Mexico inside the territorial limits of the state, and all other bodies of natural and artificial surface water that is inland or coastal, fresh or salt, and navigable or nonnavigable, and includes the beds and banks of all watercourses and bodies of surface water, that are wholly or partially inside or bordering the state or inside the jurisdiction of the state. (5) "Surface facilities" means the on-site above-ground appurtenances, structures, equipment, and other fixtures that are or will be used for storage or processing or in conjunction with the shaft operation.