Tex. Water Code § 49.238
IRRIGATION SYSTEMS
Texas · Texas Water Code · Status: effective
Cite this
- Citation
- Tex. Water Code § 49.238, IRRIGATION SYSTEMS, Texas, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/580706
- Permanent ID
ys:prov:580706@1- SHA-256
ae5bc186b7142a920f7de9a0d9a0ea256cb37641085201011a9caa193aeb26ba
The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.
Full text
(a) A district may adopt and enforce rules that require an installer of an irrigation system:
(1) to hold a license issued under Section 1903.251, Occupations Code; and
(2) to obtain a permit before installing a system within the boundaries of the district.
(b) If a district adopts rules under Subsection (a), the rules shall include minimum standards and specifications for designing, installing, and operating irrigation systems in accordance with Section 1903.053, Occupations Code, and any rules adopted by the Texas Commission on Environmental Quality under that section.
(c) A district may employ or contract with a licensed plumbing inspector, a licensed irrigation inspector, the district's operator, or another governmental entity to enforce the rules.
(d) A district may charge an installer of an irrigation system a fee for obtaining or renewing a permit under Subsection (a)(2). The district shall set the fee in an amount sufficient to enable the district to recover the cost of administering this section.
(e) This section does not apply to:
(1) an on-site sewage disposal system, as defined by Section 366.002, Health and Safety Code; or
(2) an irrigation system:
(A) used on or by an agricultural operation as defined by Section 251.002, Agriculture Code; or
(B) connected to a groundwater well used by the property owner for domestic use.