16 CFR 1201.5

§ 1201.5 Certification and labeling requirements.

United States · 16 CFR — Commercial Practices · Status: effective

Cite this

Citation: 16 CFR 1201.5, § 1201.5 Certification and labeling requirements, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/65441
Permanent ID: ys:prov:65441@1
SHA-256: fe1450ce592f12ea71eedc3a2f652949f50f0c22e9d43381039e6b6cc4320ff2

The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.

Full text

(a) Manufacturers and private labelers of glazing materials covered by this part 1201 shall comply with the requirements of section 14 CPSA (15 U.S.C. 2063) and regulations issued under section 14. (b) [Reserved] (c) Organic-coated glass that has been tested for environmental exposure from one side only must bear a permanent label on the coating stating “GLAZE THIS SIDE IN” and shall bear in the central 50 percent of the surface area the following message in letters at least 1/4 inch (7 millimeters) high: “SEE PERMANENT LABEL FOR IMPORTANT MOUNTING INSTRUCTION.” The latter message shall be attached to either side of the glazing by any means which shall ensure the message will remain in place until installation.

Legislative history

This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.