16 CFR 1204.5
§ 1204.5 Manufacturer's instructions.
United States · 16 CFR — Commercial Practices · Status: effective
Cite this
- Citation
- 16 CFR 1204.5, § 1204.5 Manufacturer's instructions, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/65504
- Permanent ID
ys:prov:65504@1- SHA-256
b8e52571cbfcddd9c50eb0ef6b1441aa78381527b445af08dd94b7eae54f1f67
The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.
Full text
(a) For all antennas covered under this part 1204, the following statement shall be included in the manufacturer's instructions, in addition to the material required by 16 CFR 1402.4(a)(1)(ii):
Under some conditions, this antenna may not prevent electrocution. Users should keep antenna away from any overhead wires. If antenna contacts a power line, any initial protection could fail at any time. IF ANTENNA NEARS ANY OVERHEAD WIRES, IMMEDIATELY LET GO, STAY AWAY, AND CALL UTILITY COMPANY.
(b) This warning statement shall be in a separate paragraph immediately following the warning statement required by 16 CFR 1402.4(a)(1)(ii)(A).
(c) This warning statement shall be legible and conspicuous and shall be in type that is at least as large as the largest type used on the remainder of the page, with the exception of the logo and any identification of the manufacturer, brand, model, or similar designations, and that is preferably no smaller than 10 point type.
Legislative history
This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.