yourstate.us
Home / United States / 16 CFR
16 CFR 1220.2

§ 1220.2 Requirements for non-full-size baby cribs.

United States · 16 CFR — Commercial Practices · Status: effective

Get this as JSONEmbed this
Cite this
Citation
16 CFR 1220.2, § 1220.2 Requirements for non-full-size baby cribs, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/65682
Permanent ID
ys:prov:65682@1
SHA-256
3d6184597fff0841020243de43fd5302cb2548e1d6fea283f7595ce0df7c19b8

The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.

Full text

(a) Except as provided in paragraph (b) of this section, each non-full-size baby crib shall comply with all applicable provisions of ASTM F406-24, Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards, approved on August 1, 2024. The Director of the Federal Register approves this incorporation by reference in accordance with 5 U.S.C. 552(a) and 1 CFR part 51. This material is available for inspection at the U.S. Consumer Product Safety Commission and at the National Archives and Records Administration (NARA). Contact the U.S. Consumer Product Safety Commission at: the Office of the Secretary, U.S. Consumer Product Safety Commission, 4330 East West Highway, Bethesda, MD 20814, telephone (301) 504-7479, email: cpsc-os@cpsc.gov. For information on the availability of this material at NARA, email fr.inspection@nara.gov, or go to: www.archives.gov/federal-register/cfr/ibr-locations. A free, read-only copy of the standard is available for viewing on the ASTM website at www.astm.org/READINGLIBRARY/. You may also obtain a copy from ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959; phone: (610) 832-9585; www.astm.org. (b) Comply with the ASTM F406-24 standard with the following exclusions: (1) Do not comply with sections 5.6.2 through 5.6.2.4 of ASTM F406-24. (2) Do not comply with section 5.16.2 of ASTM F406-24. (3) Do not comply with sections 5.19 through 5.19.2.2 of ASTM F406-24. (4) Do not comply with section 7, Performance Requirements for Mesh/Fabric Products, of ASTM F406-24. (5) Do not comply with sections 8.11 through 8.11.2.4 of ASTM F406-24. (6) Do not comply with sections 8.12 through 8.12.2.2 of ASTM F406-24. (7) Do not comply with sections 8.14 through 8.14.2 of ASTM F406-24. (8) Do not comply with sections 8.15 through 8.15.3.3 of ASTM F406-24. (9) Do not comply with sections 8.16 through 8.16.3 of ASTM F406-24. (10) Do not comply with sections 8.28 through 8.28.3.2 of ASTM F406-24. (11) Do not comply with sections 8.29 through 8.29.3 of ASTM F406-24. (12) Do not comply with sections 8.30 through 8.30.5 of ASTM F406-24. (13) Do not comply with sections 8.31 through 8.31.9 of ASTM F406-24. (14) Do not comply with sections 9.6.1 through 9.6.1.4 of ASTM F406-24.

Legislative history

This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.