16 CFR 1507.7
§ 1507.7 Handles and spikes.
United States · 16 CFR — Commercial Practices · Status: effective
Cite this
- Citation
- 16 CFR 1507.7, § 1507.7 Handles and spikes, United States, version 1 as recorded 2026-07-09, yourstate.us, https://yourstate.us/provision/66060
- Permanent ID
ys:prov:66060@1- SHA-256
4dd45a5b350dfbcc81819d66d53f9cda694972c1339feb6df5ce4833b32da274
The hash is SHA-256 of this version's text, with every run of whitespace collapsed to a single space and the ends trimmed. The ID always leads back here, and checking it says whether the text you cited is still the current version.
Full text
(a) Fireworks devices which are intended to be hand-held and are so labeled shall incorporate a handle at least 4 inches in length (see § 1500.14(b)(7)). Handles shall remain firmly attached during transportation, handling and full operation of the device, or shall consist of an integral section of the device at least four inches below the pyrotechnic chamber.
(b) Spikes provided with fireworks devices shall protrude at least 2 inches from the base of the device and shall have a blunt tip not less than 1/8-inch in diameter of 1/8-inch square.
Legislative history
This is a federal regulation, adopted through agency rulemaking under the Administrative Procedure Act — not enacted by a recorded vote of Congress.